4.10 - Safety devices and control systems requirements

Home » Technical standards » ATEX Standards » EN 16985: Spray booths for organic coating material – Safety Requirements » 4.10 – Safety devices and control systems requirements

Get information

Last edit: 13/07/2023

In the chapter 4.10 are described the requiremnets that safety devices and control systems must have.

"Safety related control systems shall be designed according to EN ISO 13849…"

 

Below is reported a summary table regarding the safety requirements required by the standard for some functions:

 

Safety Functions

PLr (Required Performance Level)

Interlocking of movable guards or safety devices with the hazardous movement/event

PL d if robots are present.

For all other cases, PLr shall be determined by risk assessment.

Interlocking of movable guards or means of access with the high voltage power supply

PL d

Automatic spray booths:

Interlocking and guard locking to prevent access during purge process (purge time)

PL c

Automatic spray booths:

Interlocking and guard locking to prevent access during the spray application process

PL d

Manual spray booths:

Interlocking of forced ventilation with the spray application system

PL d

Interlocking of fire detection system

PL d

Interlocking of the forced ventilation system with the spray application system

PL c

Interlocking of filter monitoring

PL d

Interlocking of monitored back-up filter with downstream fan

PL d
Annex B

Index

EN 16985: Spray booths for organic coating material – Safety Requirements 4.7.1.1 – The Ventilation 4.7.3 – Manual Application 4.9 – Explosions 4.10 – Safety devices and control systems requirements Annex B
Safety in Collaborative Robotics
There is no “Collaborative Robot”. That is one of the first statements you hear from people working in Collaborative Robotics. The reason is because...
Read more